Condre CD Duplicator
Getting Started
31
Mode 2 Compare
Under the ISO 9660 standard, a CD-ROM sector can be Mode 1 or Mode 2.
Mode 1 allocates2048 bytes for user data, plus a third layer of error detection and error correction
codes. This is the Mode that provides the highest integrity for computer data.
Mode 2 allocates 2336 bytes for user data, and no third layer of error detection and error
correction. This mode is considered appropriate for segments of music, graphics and video,
especially in CD-ROM-XA and CD-I implementations.
If you want to verify that the information on the master CD matches that on the copy, then set this
sub-function to
Yes
, and the system will compare the two. The default for this sub-function is
No
.
Options:
No (default)
Yes
Startup Command
You can set the system up so that the startup operation mode is always the same. In most cases,
users will want
copy
as the startup command. However, you may set the system to start with
any of the operations listed as options below.
Options:
copy
copy+comp
emulate
compare
format
test
quick erase
full erase
verify
external
[Q]
startup command
[*] copy
[Q]
mode 2 compare
[*] No
Summary of Contents for CD Tracer
Page 1: ...Condre CD Tracer Duplicator User Guide...
Page 42: ......
