Condre CD Tracer, User Manual

Page: 7 / 43

Condre CD Duplicator
Getting Started
3
Chapter 2 Getting Started
Turning on the System
Plug the AC cord into the CD Tracer system and then into a wall outlet. Press the ON/OFF
button located in the bottom right corner of the tower unit. The LCD Panel display will light up,
indicator lights on each of the CD writer drives will flash momentarily, the ON indicator light
next to the ON/OFF button will be lit, and the system will indicate it is ready for operation by
emitting a three-tone beep.
About the LCD Panel Display
When you first turn the system on, the information displayed in the LCD Panel will indicate the
current mode of operation (e.g.
copy, emulate
, etc.)
If
copy
is not displayed in the LCD Panel Display, press the
Mode
button to cycle through the
list of operation modes (
copy, copy+comp, emulate, compare, verify, external
) until
copy
is displayed. This will ensure that you are in the correct mode for the first exercise
presented in this manual, which is copying a CD to a CD (refer to page 3).
For Best Performance
All master CDs must be 40X quality. Use Condre Branded Bulk Media (CDs recommended for
best performance), which are available in 300-disc cartons.
Please consult the dealer where you purchased your unit for the recommended media.
A553M62:57
copy
<mod