Chapter 1 Introduction Condre CD Duplicator
2
Installation Instructions
Unpack the CD Tracer system in a clean working area with moderate temperature control.
Confirm that the following items have been shipped with the system: power cable, user manual,
and warranty card.
Confirm that the voltage setting (AC 115/230V) is correct.
Confirm that the power input is stable and consistent. Install an uninterruptible power supply
(UPS) if necessary.
Make sure that the environment for the CD Tracer system is properly ventilated and free of dust,
excessive heat and humidity, and electronic interference.
Make sure the system is properly grounded. Do not attempt to defeat the third ground prong on
the power cable.
The system is shipped in professionally designed, foam-based external packaging. Please keep
and store this packaging for future transport or storage of the system.
Warranty Information
The CD Tracer system is guaranteed to be free from defect in materials
and workmanship for one year. The warranty is not applicable to defects or
malfunctions caused by misuse, accidents, or system changes by the end
user. Condre is not responsible for damages to data or related content by
the CD Tracer system.
NOTE: There is no need to fill out a warranty card as Condre keeps track of
all Duplicators by the serial number of the unit in a database.
Note: Condre assumes no responsibility for the illegal copying and
distribution of audio, video, and text/graphics data.
Technical Support
For detailed technical support or questions regarding the CD Tracer, contact Condre Technical
Support at
952.253.6841
Summary of Contents for CD Tracer
Page 1: ...Condre CD Tracer Duplicator User Guide...
Page 42: ......
