Condre CD Tracer, User Manual

Page: 24 / 43

Getting Started Condre CD Duplicator
20
Operation Mode Details
Copy
Use the Copy operation mode to copy from a partition on the hard disk or from a master CD
placed in the first CD drive. Before actually starting the copy operation, check your sub-function
settings. Here’s how:
ƒ
Press and hold the Mode button until it “chirps.” Then, when
setup
appears, press the Go
button to review each sub-function setting. Use the Mode button to change any sub-function
setting.
ƒ
If you are copying audio and graphics or text, make sure the
CD+G
sub-function is set to
Yes
.
ƒ
Press the Go button until you can view the
setup
sub-function in the display panel. Then
press and hold the Mode button until it “chirps” to return to the
copy
operation mode.
When copying from a master CD, place the master in the top CD drive and blank CDs in the
remaining CD drives. The full procedure for copying an audio CD is provided starting on page 3.
A full procedure for copying a Karaoke CD or any CD with text and/or graphics is provided
starting on page 11.