Condre CD Tracer, User Manual

Page: 21 / 43

Condre CD Duplicator
Getting Started
17
Copying Data CDs (continued)
Back to the
Operation
Mode Display
10. Press and hold the Mode button until it “chirps.” Then release the Mode
button. Note that the default operation mode is displayed. If not already
displayed, press the
Mode button until
copy
is displayed:
Insert the
Karaoke
Master CD 11. Place the master CD in the first CD drawer. Use the Open/Close button
to open and close the CD drawer.
Insert a Blank
CD 12. Open the second CD drawer and place a blank CD in it. Close the
drawer (using the Open/Close button).
System
Automatically
Analyzes the
Operation Once you’ve placed the CDs in their respective drawers, you will hear the
system start up. It will automatically scan the master CD to determine the
size and the duration of the master CD. Look for this information in the
LCD Display panel. It should look something like this:
In the above example, the master CD is
448 M
egabytes, and is 51 minutes,
and 01 seconds in duration,
51:01
.
The
1start>
prompt indicates that the system is going to make one copy as
soon as you press the Go button.
Begin the
Copy Process 13. Press the Go button. The system will start the copying process. Note
that the LCD display shows
L
and
C
STATUS
codes. These indicate
how many minutes have been read (
L
) and how many have been written
(
C
). When the copy procedure is finished, you will hear a three-tone
beep, the second drawer will automatically open, and the LCD panel will
indicate that one CD passed, and that zero CDs failed the operation. For
example:
copy
<mode
PASS 1 FAIL 0
L 51 C51
448M51:01
1 START >
copy
<mode