2.1.2 2.1.2 Configuration Mode
Configuration Mode may be selected whenever the Enter button is pressed during
Operation Mode or when the Monitor Utility is invoked from the remote terminal. In
Configuration Mode the user is able to modify the settings of the
Condre RAID
and perform
different functions to the controller. It is important to note when running Configuration
Mode the
Condre RAID
should be off-line and not accessed by any application.
2.1.2.1 Entering a Password
If the password-checking feature is enabled, you will be prompted to enter your password
and will not be allowed to proceed until the password is entered correctly. The default
password is “00000000”. Refer to section
4.3.5 System Parma Menu
for instructions
on changing the default password.
6
You may use the front panel buttons to enter the password. Use the “
↑
” and “
↓
” arrow
keys to scroll through the available characters, then use the ”Enter” button to select the
character and move to the next position. Once all the characters have been entered
press the ”Enter” button to access the Configuration Mode.
