4.3.7 RAID Funcs menu
The RAID Funcs menu allows different functions to be performed on the
Condre RAID
.
NOTE
: Any changes made to
61 Format
Disk
,
62
Init
RAID
5
,
63
R5
Check
will cause
data to be permanently erased on the disks.
Sub-menu
Sub options
Settings
Default setting
61 Format Disk
611 Format Disk1
Stop, Start
Stop
612 Format Disk2
Stop, Start
Stop
613 Format Disk3
Stop, Start
Stop
614 Format Disk4
Stop, Start
Stop
615 Format Disk5
Stop, Start
Stop
616 Format Disk6
Stop, Start
Stop
617 Format Disk7
Stop, Start
Stop
618 Format Disk8
Stop, Start
Stop
619 Format Disk9
Stop, Start
Stop
61A Format Disk10
Stop, Start
Stop
61B Format Disk11
Stop, Start
Stop
61C Format Disk12
Stop, Start
Stop
61D Format Disk13
Stop, Start
Stop
61E Format Disk14
Stop, Start
Stop
61F Format Disk15
Stop, Start
Stop
61G Format Disk16
Stop, Start
Stop
61H Format ALL
Stop, Start
Stop
Description:
Use to low level formats the disk. This option is only
available when the
Condre RAID
is not configured. This option
is not mandatory but optional. Most new disks do not require
a low level format. Use only if drive is exhibiting problems.
Sub-menu options
Settings
Default setting
62 Init R5/R3
Stop, Start
Stop
Description:
Use when configuring a disk group for RAID Level 3 or 5.
During an initial R3 or 5 configuration this is automatically
executed.
Sub-menu options
Settings
Default setting
63 R5/R3 Check
Stop, Start
Stop
Description:
Use to verify the R5/R3 configuration. This option should
be executed when initially configuring for R5/R3.
44
Sub-menu options
Settings
Default setting
64 Beeper
Clear, Enable, Disable
Enable
Description:
Use to turn on or off the audible alarm when an
error occurs or during an Init R5/R3, R5 Check.