6.2.1 Communication Ports Settings
To configure the RS-232 communication ports the following settings must be configured
at the remote terminal (or terminal emulation program) and at the
Condre RAID
.
Parameter Value
Default
Value
Baud Rate
2400, 4800, 9600, 14400, 19200,
28800, 38400, 57600, 115200
19200
Stop bits
1, 2
1
Data Bits
7, 8
8
Parity
None, Odd, Even
None
Flow Control
Software Flow Control
(XON/XOFF)
Enabled
6.2.2 Terminal Access
To access the monitor utility connect (a standard female DB-9 to female DB-9 cable is
included) the remote ANSI terminal or terminal emulation program to the RS-232 port
located at the back of the
Condre RAID
controller. For instructions on how to use the
Monitor Utility, go to section
6.3 Using the Monitor Utility
6.2.3 Using a PC for Terminal Emulation
51
If you do not have a dedicated terminal, you can still use a PC with third party
communication software that supports ANSI terminal emulation. Most operating systems
provide ANSI terminal emulation programs.
