Comtrol RocketLinx ES7528 User Manual Download Page 31

Page: 31 / 144

Time Setting

RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide

: 2000509 Rev. A

- 31

Time Setting

Time Setting allows you to set the time manually or through an NTP server. Network Time Protocol (NTP) is used to

synchronize computer clocks on the internet. You can configure NTP settings here to synchronize the clocks of several

switches on the network.

DNS Server

The Domain Name System (DNS) is a hierarchical naming

system built on a distributed database for computers, services,

or any resource connected to the Internet or a private network.

It associates various information with domain names assigned

to each of the participating entities. Most importantly, it

translates domain names meaningful into the numerical

identifiers associated with networking equipment for the

purpose of locating and addressing these devices worldwide.

Apply

Click

Apply

to apply the settings.

Note: You must Save the settings (Page 137), if you want to

maintain these settings if the RocketLinx ES7528 is
powered off.

IP Configuration

Description

Summary of Contents for RocketLinx ES7528

















































































































































Search results

Summary of Contents for RocketLinx ES7528

Reviews:

Related manuals for RocketLinx ES7528

Brands by name

Popular brands

Comtrol RocketLinx ES7528, User Manual

Search results

Summary of Contents for RocketLinx ES7528

Reviews:

Related manuals for RocketLinx ES7528

Brands by name

Popular brands