XSAT7080 X-Band Transceiver
Revision 0
50 and 100-Watt Installation
MN/XSAT7080.IOM
B–8
Step
Procedures
13
Slide two springnuts, (4, figure B-2) into channel of the Unistrut brackets
(1, figure B-1).
14
Repeat procedure for second Unistrut bracket.
15
Install brackets (1, figure B-2) and secure to Unistrut bracket with bolts (6), flat
washers (2) and split lock washers (4).
16
Install four bolts (6, figure 2-2), flat washers (2) and splitlock washers (3) on the
XSAT unit.
17
Lift the XSAT unit and slide bolts (6) into the grooves of the brackets (1).
18
Ensure the washers are against the bracket.
19 Tighten
the
bolts.
Figure B-7. Install XSAT 100 Watt Unit
IMPORTANT
Ensure the brackets are centered in each Unistrut. Ensure the unit is positioned
with the fan facing outward and free of any obstructions. Do not tighten bolt (5)
at this time.
