XSAT7080 X-Band Transceiver
Revision 0
50 and 100-Watt Installation
MN/XSAT7080.IOM
B–21
B.6.2.1
A
SSEMBLE
W
AVEGUIDE
S
WITCH
, AS/9759-1
Step
Procedures
1
Remove all protective tape from switch and keep it clean
2
Install waveguide termination (1, Figure B-15) and gasket (4) to Port 3 (Fig.
2-19) of switch (7, Figure B-15) and secure with bolts (8), lockwashers (6),
and flat washer (7).
3
Install waveguides (2) and gaskets (4) to Ports 2 and 4 of switch (7) and
secure with bolts (8), lockwashers (6), and flat washers (7).
4
Final assembly should look identical to Figure B-18.
Set waveguide switch assembly aside for later installation.
Figure 2-17. Assemble Waveguide Switch,
AS/9759-1
(Partial Kit)
Figure B-18. Switch Port Locations
