Comtech EF Data Vipersat CDM-570L, User Manual

Page: 80 / 146

Vipersat Configuration
3-46
Vipersat CDM-570/570L User Guide
Figure 3-64
Transmit Data Rate prompt
Note that the valid range for this parameter will vary depending on the modula-
tion type, coding rate, and FAST feature data rate.
Transmit FEC Type
Enter C at the command prompt to use the dialog shown in Figure 3-65 to enter
the FEC Coding Type for the CDM-570/570L’s home state. Turbo must be
selected when operating in Vipersat mode.
Figure 3-65
Transmit FEC Type prompt
Transmit Coding Rate
Enter D at the command prompt to use the dialog shown in figure 3-66 to set the
Transmit Coding Rate for the target CDM-570/570L’s home state.
Note that Coding Rates 3 (1/2), 4 (2/3), and 8 (1/1) are not valid selections when
operating in Vipersat mode with Turbo Product Coding.
Figure 3-66
Transmit Coding Rate prompt