Comtech EF Data Vipersat CDM-570L, User Manual

Page: 53 / 146

Chapter
3 -
Using the Command Line Interface (CLI)
3-19
Vipersat Configuration
Figure 3-24
Global Switch Type prompt
Delete Remote
Entering D at the command prompt shown in figure 3-16 brings up the Delete
Remote dialog shown in figure 3-25.
Figure 3-25 Delete Remote prompt
Enter the number of the Remote CDM-570/570L at the command prompt to
delete it from the STDMA group for this Hub modem.
Enable/Disable Remote
Enter E at the command prompt in figure 3-16 to display the dialog shown in
figure 3-26. The Remotes in the STDMA group are displayed, indicating
whether each is currently Enabled (E) or Disabled.
Figure 3-26
Enable/Disable Remote prompt
Enter the number of the Remote at the command prompt to toggle the Remote
from its current Enable/Disable configuration.
View Remote(s)
Entering V at the command prompt shown in figure 3-16 will display the listing
of Remote(s) that belong to the STDMA group for this Hub modem, as shown
in figure 3-27.