Comtech EF Data Vipersat CDM-570L, User Manual

Page: 67 / 146

Chapter
3 -
Using the Command Line Interface (CLI)
3-33
Vipersat Configuration
Figure 3-41 ToS Switching Control screen
ToS Switching Entry
After determining what ToS value to use, either application or router classifier,
select a ToS entry from the list for configuration or edit. The screen will prompt
for inputs to the list of range-checked values, as shown in the sample dialog in
figure 3-42 that displays the entries for TOS 03.
Figure 3-42
ToS Switching Entry dialog
•
Enter Name for TOS ID [ ] - At the prompt, enter a user-defined text
label for circuit identification.
•
Enter the TOS ID - Enter an integer value in the range of 1 to 63.
Entering a value of 0 will result in no switch.
•
Enter the Switch Type - Enter an integer value in the range of 64 to 254
at the prompt to inform the VMS what switching policy to use. Entering a
value of 0 will result in no switch.