Comtech EF Data MBT-5000, User'S Installation And Operation Manual

Page: 59 / 138

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Front Panel Operation Revision 4
5–5
5.2.1 SELECT: (Main) Menu
SELECT: Config Monitor
Info Utility Test (◄ ► E)
Press ENTER or CLEAR to immediately access the SELECT: menu screen from the opening screen.
From any nested menu, press CLEAR repeatedly until this screen reappears. Then, use the
◄ ►
arrow keys to select from the menu branch choices shown.
Unless otherwise noted, all menu functions are typical for use with Converter
(Side) A and Converter (Side) B operation.
The menu branches available from the SELECT: (Main) Menu are as follows:
Menu Branch Sect Function
Config 5.2.2
(Configuration) Used to fully configure the MBT-5000.
Monitor 5.2.3
Used to monitor the alarm status of the unit, to view the log of stored events, and to
display the Receive Parameters screen.
Info 5.2.4
(Information) Used to view information on the unit, without having to go into
configuration screens.
Utility 5.2.5
Used to perform miscellaneous functions, such as setting the Real-time clock,
adjusting the display brightness, etc.
Test 5.2.6 Used to run diagnostics tests on the front panel LEDs and VFD to verify operation.