Comtech EF Data MBT-5000, User'S Installation And Operation Manual

Page: 90 / 138

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Ethernet-based Remote Product Management Revision 4
6–14
6.5.5.2.2 Admin | SNMP
Use this page to set and returns administration information for the MBT-5000 Simple Network
Management Protocol (SNMP) feature.
Figure 6-3. Admin | SNMP page
SNMP
•
Simple Network Management Operational Status: Use the drop-down list to select the
Simple Network Management operational setting as Enabled or Disabled .
•
The SNMP Read and Write Community String fields can be any combination of characters
and a length of 0 - 20 characters:
o
The factory default for the
Read Community String
parameter is public .
o
The factory default Write Community String is private .
•
Enable Authentication Trap: Use the drop-down list to select the Enable Authentication
Trap operational setting as Enabled or Disabled .
• The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 - 20 characters:
o
The factory default for the Trap Community String is comtech .
•
Trap Version: Use the drop-down list to select the SNMP Trap Version as SNMPv1 or
SNMPv2 .
For details pertaining to the remaining configuration parameters available on this page, see
Sect. 6.3 SNMP INTERFACE .