Comtech EF Data LGAN, Installation And Operation Manual

Page: 63 / 118

LGaN
Revision 0
Ethernet Interface Operation 4–23 MN-LGAN
4.5.4 Status Pages
Use these pages to access to event logging, operational statistics, status, FET windows, and operational
trending graphs. Click the
Status tab, and then click the Summary , Status , FETs , Events , MOP ,
Statistics , or Trending hyperlink to continue.
4.5.4.1 Status | Summary
Click [Refresh] to see the latest page data.
Figure 4-18. ‘Status | Summary’ Page
Summary Info
Name Description
Summary The Summary Fault line indicates that no faults are present with “OK” on green
background. If a fault exists, the Summary Fault message changes to “FAULT” on a red
background. Should this occur, review the logged faults and alarms on the Status |
Events page (see Sect. 4.5.4.4).
Terminal Status Change This section alerts you to any configuration changes that were made to the unit since the
last time the Terminal Status Change flag was reset (i.e., you click [Clear] to reset the
message):
• If the status displays NO, no changes have been made to the unit.
• If the status displays YES, then a status change has occurred for one or more of
the following reasons:
o
An operating parameter is changed, e.g., when a command that changes
an operational value is executed successfully;
o
A fault condition is triggered;
o
A redundant switchover occurs.