LGaN
Revision 0
Ethernet Interface Operation
4–7
MN-LGAN
To see the full response messages, you can use the Tera Term terminal emulation program configured
as a Telnet client. An example of the login process and remote control operation, when using Tera Term as
the interface, is shown in Figure 4-2.
Figure 4-2. Telnet Interface Example – Tera Term
4.3.1.1 Configure Tera Term for Telnet Remote Control Operation
Figure 4-3. Configure Tera Term
See Figure 4-3. Do these steps:
1. Make sure to define the Connect To Telnet connection properties correctly (new connection
prompt is displayed when Tera Term is started) (Figure 4-3):
a. Enter the LGaN’s Traffic/Management IP Address as the “Host address” (e.g.,
192.168.1.4).
b. Enter 23 as the “TCP port#”.
c. Select TCP/IP instead of Serial.
d. Click
[OK]
to save your settings.
2. For Terminal Setup (Setup
Terminal) (Figure 4-3, right):
a. Select the “CR+LF” option in the Receive dropdown box in the New-line section.
b. Select the “CR+LF” option in the Transmit dropdown box in the New-line section.
c. Click
[OK]
to save your settings.
Summary of Contents for LGAN
