Comtech EF Data LGAN, Installation And Operation Manual

Page: 94 / 118

LGaN
Revision 0
Serial Interface Operation 5–20 MN-LGAN
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Maximum
Operating
Points
N/A 1 bytes
(command)
810 bytes
(response)
Query only.
Used to view maximum operating points
Where:
MAX is Maximum
MIN is Minimum
FWPWR = Forward Power (dBm)
ATEMP = Amplifier Heat Sink Temperature (deg C)
OTEMP = Outside Temperature (deg C) (100W/250W)
RVPWR = Reverse Power (dBm) (100W/250W)
INPWR = Input Power (dBm) (250W)
ETEMP = Exhaust Temperature (dec C) (250W)
RF40I = RF 40V current (amps) (250W)
RF24I = 24V RF current (50W/100W)
PS24I = 24V PS current
AC Volt = AC Vrms (100W/250W)
AC Curr = AC Irms (amps) (100W/250W)
AC VPEAK = AC Volt Peak (100W/250W)
AC WATT = AC Watts (100W/250W)
AC LINE = AC Line Frequency (Hz) (100W/250W)
Example:
<1/mop?
>1/MOP=
10-06-19 09:46:51 MAX SYS FWPWR=<23.0
10-06-19 09:46:51 MAX RF ATEMP=028.7
10-06-19 09:56:43 MIN RF ATEMP=027.2
10-06-19 09:59:26 MAX SYS OTEMP=036.9
10-06-19 09:48:02 MIN SYS OTEMP=034.2
10-06-19 09:46:51 MAX SYS RVPWR=<25.0
10-06-19 10:00:26 MAX RF 24I=14.7
10-06-19 09:59:22 MAX SYS PS24I=08.6
10-06-19 09:56:35 MAX PS AC Volt=207.6
10-06-19 10:00:24 MIN PS AC Volt=206.2
10-06-19 10:00:24 MAX PS AC Curr=03.33
10-06-19 09:56:35 MIN PS AC Curr=00.45
10-06-19 09:56:35 MAX PS AC VPEAK=290.8
10-06-19 10:00:24 MIN PS AC VPEAK=288.7
MOP=
MOP*
MOP? MOP=x
(See
description for
details of
return string)