Comtech EF Data KPA-020IN, Installation And Operation Manual

Page: 48 / 99

Ku-Band Solid-State Power Amplifier Revision 0
Operation MN/KPA.IOM
4-13
4.2.1.3 Current Faults Menu
---------SELECT---------
--CURRENT-FAULTS-MENU---
Displays the status of the current fault conditions. The LCD display will indicate “
FT ”
when a fault condition exists. The display will indicate “ OK ” when a fault has not
occurred.
KPA-020IN Only:
SELECT: CURRENT FAULTS: POWER FAULTS
Power–Faults:----+12V=OK
-12V=OK-VCC=OK---5V=OK-
-----28-VDC-PS-=-OK-----
------9-VDC-PS-=-OK-----
Displays the DC voltage power supply faults. The DC voltage displayed are:
•
+12 VDC
•
-12 VDC
•
VCC
•
-5 VDC
•
+28 VDC
•
+9 VDC
SELECT: CURRENT FAULTS: SSPA TEMPERATURE FAULT
Fan Faults
Displays status of both FAN #1 and FAN #2.