Comtech EF Data KPA-020IN, Installation And Operation Manual

Page: 37 / 99

Ku-Band Solid-State Power Amplifier Revision 0
Operation MN/KPA.IOM
4-2
Refer to Table 4-1 for logical function of each keypad entry:
Table 4-1. Operating Functions
Item Function Description Reference
[ENTER] Enters commands into the converter. ENT
CLR Clears commands and data selected and not entered. CLR
Arrow Key Selects functions and the menu operating data. →
Arrow key Selects functions and the menu operating data. ←
Arrow Key Selects functions and the menu operating data. ↑
Arrow Key Selects functions and the menu operating data. ↓
LCD Display Displays commands and data entered into the keypad.
GREEN Indicator Prime Power is applied when the light is On. POWER ON
YELLOW Indicator Transmit function operating when the light is On. TRANSMIT ON
YELLOW Indicator In REMOTE CONTROL Mode, when the light is ON. REMOTE
YELLOW Indicator Operating On-Line to RX data when the light is On. ON-LINE
RED Indicator Fault condition exists when the light is On. FAULT
RED Indicator Faults stored and logged when the light is On. STORED FAULT
Input Sample Type N connector test point to sample RF input. SAMPLE INPUT
Output Sample Type N connector test point to sample RF output. SAMPLE OUTPUT