Compaq ProLiant DL380 G2 Page 7 Quick Install Manual Download

Page: 7 / 108

viii Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

Compaq Confidential – Need to Know Required

Writer

: Rachel Williams

Project

: Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

Comments

Part Number

: 221544-001

File Name

: a-frnt.doc

Last Saved On

: 12/27/00 10:58 AM

Symbols in Text

These symbols may be found in the text of this guide. They have the following
meanings.

WARNING:

Text set off in this manner indicates that failure to follow directions

in the warning can result in bodily harm or loss of life.

CAUTION:

Text set off in this manner indicates that failure to follow directions

can result in damage to equipment or loss of information.

IMPORTANT:

Text set off in this manner presents clarifying information or specific

instructions.

NOTE:

Text set off in this manner presents commentary, sidelights, or interesting points

of information.

Symbols on Equipment

These symbols may be located on equipment in areas where hazardous
conditions may exist.

This symbol, in conjunction with any of the following symbols, indicates

the presence of a potential hazard. The potential for injury exists if

warnings are not observed. Consult your documentation for specific

details.

This symbol indicates the presence of hazardous energy circuits or electric

shock hazards. Refer all servicing to qualified personnel.

WARNING:

To reduce the risk of injury from electric shock hazards, do not

open this enclosure. Refer all maintenance, upgrades, and servicing to

qualified personnel.

This symbol indicates the presence of electric shock hazards. The area

contains no user or field serviceable parts. Do not open for any reason.

WARNING:

To reduce the risk of injury from electric shock hazards, do

not open this enclosure.

Summary of Contents for ProLiant DL380 G2













































































































Search results

Summary of Contents for ProLiant DL380 G2

Reviews:

Related manuals for ProLiant DL380 G2

Brands by name

Popular brands

Compaq ProLiant DL380 G2, Quick Install Manual

Search results

Summary of Contents for ProLiant DL380 G2

Reviews:

Related manuals for ProLiant DL380 G2

Brands by name

Popular brands