Compaq ProLiant DL380 G2 Page 21 Quick Install Manual Download | Manualshive

Page: 21 / 108

background image

Clustering Overview

1-11

Compaq Confidential – Need to Know Required

Writer:

Rachel Williams

Project:

Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380

Comments:

Part Number:

221544-001

File Name:

b-ch1 Clustering Overview.doc

Last Saved On:

12/27/00 10:58 AM

4.

Upgrade controller firmware.

Firmware provides an interface between hardware and software. It is
important to use the latest firmware for full hardware functionality.
Upgrading controller firmware is performed using a diskette created as
part of server configuration. Refer to “Updating Controller Firmware” in
Chapter 3.

5.

Verify ServerNet I connections.

If your cluster uses the ServerNet I cluster interconnect, you must ensure
that the hardware for the interconnect is properly installed. This
procedure instructs you to perform tests of the adapters and the cables.
Refer to “Verifying ServerNet I Connections” in Chapter 3.

6.

Install the software.

Installing the software provides your cluster with the SCO UnixWare 7
operating system and the SCO UnixWare 7 NonStop Clusters software
discussed in this chapter. You must select the Quick Install CDs for your
configuration and install the software on both nodes. Installation
prompts guide you through the installation and request the information
found in your completed worksheets. Refer to “Installing the Cluster
Using Quick Install” in Chapter 3.

The following sections offer sources of information and support for
application installation and cluster documentation.

Resources for Application Installation

Client/server software applications are among the key components of any
cluster. Compaq is working with its key software partners to ensure that
cluster-aware applications are available and that the applications work
seamlessly on Compaq ProLiant

Clusters for SCO UnixWare 7.

Compaq white papers provide information about installing applications in
Compaq ProLiant Clusters for SCO UnixWare 7. Visit the Compaq High
Availability website to download cluster-related white papers and other
technical documents at

http://www.compaq.com/highavailability

IMPORTANT:

Some software applications may need to be updated to take advantage of

clustering. Contact the software vendors to check whether their software supports SCO
UnixWare 7 NonStop

Clusters and to ask whether any patches or updates are available for

SCO UnixWare 7 NonStop Clusters operation.

«
...
19
20
21
22
23
...
»

Summary of Contents for ProLiant DL380 G2













































































































Reviews:

No comments

Related manuals for ProLiant DL380 G2

Brand: EBN Pages: 9

kontron KBox B-201-CFL

Brand: S&T Pages: 72

Vehicle-Mount Computer 8515

Brand: Psion Teklogix Pages: 190

Brand: Biostar Pages: 60

Ferrari 1000 Series

Brand: Acer Pages: 123

Brand: Acer Pages: 112

Brand: Vivo Pages: 16

Brand: Acer Pages: 25

Brand: Acer Pages: 70

Brand: Acer Pages: 96

Brand: Acer Pages: 88

Brand: Acer Pages: 134

Brand: Acer Pages: 1

Brand: Acer Pages: 12

Brand: Acer Pages: 38

Brand: Acer Pages: 83

Brand: Acer Pages: 109

Brand: Acer Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands