Compaq ES40CSLP, Installation, User & Service Manual

Page: 53 / 196

Operation
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 3–7
When the operating system is running, the control panel displays the console revision. It is
useful to create a customized message if you have a number of systems and you want to
identify each system by a node name.
Use the SRM set ocp_text command to change this message. The message can be up to 16
characters and must be entered in quotation marks.
Example 3-3 Set ocp_text Command
P00>>> set ocp_text “Node Alpha1”
3.4.3 Displaying the Hardware Configuration
View the system hardware configuration for Tru64 UNIX and OpenVMS systems from the
SRM console. It is useful to view the hardware configuration to ensure that the system
recognizes all devices, memory configuration, and network connections.
Displaying a Tru64 UNIX or OpenVMS Configuration
Use the following SRM console commands to view system configuration for Tru64 UNIX or
OpenVMS systems. Additional commands to view the system configuration are described in the
Compaq AlphaServer ES40 User Interface Guide.
show boot*
Displays the boot environment variables.
show config
Displays the logical configuration of interconnects and buses on the system
and the devices found on them.
show device
Displays the bootable devices and controllers in the system.
show fru Displays the physical configuration of FRUs (field-replaceable units). See
Chapter 6 for information on this command.
show memory Displays configuration of main memory.
Example 3-4 show boot *
P00>>>show boot*
boot_dev dka0.0.0.1.1
boot_file
boot_osflags a
boot_reset OFF
bootdef_dev dka0.0.0.1.1
booted_dev
booted_file
booted_osflags