Removal and Replacement
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 5–5
5.4 Top Cover
____________________________ Caution __________________________
Use care when removing and replacing the cover to prevent damage to the RFI
gaskets that are located around the cover and opening.
______________________________________________________________
Perform the following procedure to remove the top cover:
1.
Extend the chassis for service (see Section 5.2).
2.
Loosen the three captive screws
on the top left side of the top cover (see Figure 5-3).
3.
Lift the left edge of the cover and slide it to the left until the three tabs
on the right edge
of the top cover come out of the three slots
in the chassis wall and lift the top cover off
of the chassis.
To replace the top cover, refer to Figure 5-3 and reverse steps 1 through 3 of the removal
procedure.
Figure 5-3 Removing and Replacing the Top Cover
EA-00065
1
2
3
4
Summary of Contents for ES40CSLP
