Installing the ProLiant CL380 Rack Model
3-3
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: d-ch3 Installing a Rack ProLiant CL380.doc Last Saved On: 8/28/00 4:37 PM
Rack Warnings and Precautions
Before beginning the installation procedures, make sure you understand the
following warnings:
WARNING:
To reduce the risk of personal injury, always ensure that the rack is
adequately stabilized before extending a component outside the rack. A rack
may become unstable if more than one component is extended for any reason.
Extend only one component at a time.
WARNING:
To reduce the risk of personal injury or damage to the equipment,
be sure that:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizers are attached to the rack if it is a single rack installation.
■
The racks are coupled together in multiple rack installations.
WARNING:
To reduce the risk of personal injury or damage to the equipment, at
least two people are needed to safely unload the rack from the pallet. An empty
42U rack weighs 253 pounds (115 kilograms), is over 7 feet (2.1 meters) tall,
and may become unstable when being moved on its casters. Do not stand in
front of the rack as it rolls down the ramp from the pallet, but handle it from the
sides.
