Compaq 5500R - ProLiant - 256 MB RAM, Maintenance And Service Manual, Page: 75 / 165

Diagnostic Tools 3-17
For use with Pentium II and Pentium III Xeon processor-based servers only
Table 3-2
POST Error Messages
continued
Error Code
Audible Beeps
L=Long S=Short Probable Source of Problem Recommended Action
1785- continued
Drive positions
appear to have
changed. 6. Run Array Diagnostic
Utility if previous positions
are unknown. Then turn
system power OFF and
move drives to their
original positions.
Configuration
information
indicates drive
positions
beyond the
capability of
this controller.
This may be
due to drive
movement from
a controller that
supports more
drives than the
current
controller.
7. To avoid data loss turn
system power OFF and
reattach drives to the
original controller.
Configuration
information
indicates drives
were configured
on a controller
with a newer
firmware
version.
8. To avoid data loss,
reattach drives to original
controller or upgrade
controller firmware to the
version of the original
controller using Option
ROMPaq.
Press F1 to resume.
1786-Drive Array
Recovery Needed
The following drive(s)
need Automatic Data
Recovery: Drive
X.
Select "
F1
" to
continue with
recovery of data to
drive(s).
Select " F2 " to
continue without
recovery of data to
drive(s).
None Interim Data Recovery mode.
Data has not been recovered yet. Press F1 to allow Automatic
Data Recovery to begin. Data
will automatically be restored to
drive
X now that the drive has
been replaced or now seems to
be working.
-Or-
Press F2 and the system will
continue to operate in the
Interim Data Recovery mode.
continued