INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 86
INSTALLATION AND OPERATION MANUAL
CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
Other Info
This section contains information about the state of the server and the latest round-trip
time.
State:
Shows the state of the server as one of the following values.
Disabled: The selected server is disabled.
Not Ready: The server is enabled but IP Communication is not yet up and running.
Ready: The server is enabled, IP Communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead ( X seconds left): Access attempts were made to the server but it did not reply
within the configured timeout. The server has temporarily been disabled but
with get re-enabled when the dead time expires. The number of seconds left
before this occurs is displayed in parenthesis. The state is only reachable when
more than one server is enabled.
Round Trip Time:
The time interval (measured in milliseconds) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from the RADIUS
authentication server. The granularity of this measurement is 100 ms. A value of 0 ms
indicated that there hasn’t been round-trip communication with the server yet.
