manualshive.com logo in svg

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Share
Download
Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 22

INS_CWGE28FX4TX24MS_REV–   08/31/12     PAGE 22

INSTALLATION AND OPERATION MANUAL 

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

LLDP Statistics

This page provides an overview of all LLDP traffic. 

Two types of counters are shown. Global counters are counters that refer to the whole stack, 
switch, while local counters refer to counters for the currently selected switch.

Global Counters

Label

Description

Neighbor entries were last changed at Shows the time when the entry was last deleted or added. It also 

shows the time elapsed since last change was detected.

Total Neighbors Entries Added

Shows the number of new entries added since the switch 
rebooted.

Total Neighbors Entries Deleted

Shows the number of new entries deleted since switch reboot.

Total Neighbors Entries Dropped

Shows the number of LLDP frames dropped due to that the entry 
table was full.

Total Neighbors Entries Aged Out

Shows the number of entries deleted due to Time-To-Live expiring.

Summary of Contents for CWGE28FX4TX24MS






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands