INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 18
INSTALLATION AND OPERATION MANUAL
CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
IP Setting
Configure the switch-managed IP information on this page.
Label
Description
DHCP Client
Enable the DHCP client by checking this box. If DHCP fails and the
configured IP address is zero, DHCP will retry. If DHCP fails and the
configured IP address is non-zero, DHCP will stop and the configured
IP settings will be used. The DHCP client will announce the configured
System Name as hostname to provide DNS lookup.
IP Address
Assign the IP address that the network is using. If DHCP client function
is enabling, you do not need to assign the IP address. The network
DHCP server will assign the IP address for the switch and it will be
display in this column. The default IP is 192.168.10.1
IP Mask
Assign the subnet mask of the IP address. If DHCP client function is
enabling, you do not need to assign the subnet mask
IP Router
Assign the network gateway for the switch. The default gateway is
192.168.10.254
VLAN ID
Provide the managed VLAN ID. The allowed range is 1 through 4095.
SNTP Server
SNTP is an acronym for Simple Network Time Protocol, a network
protocol for synchronizing the clocks of computer systems. SNTP uses
UDP (datagrams) as transport layer.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved
values.
Renew
Click to renew DHCP. This button is only available if DHCP is enabled.
