Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 70

Page: 70 / 117

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 70

INSTALLATION AND OPERATION MANUAL

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

IGMP Snooping Status

Label

Description

VLAN ID

The VLAN ID of the entry.

Groups

The present IGMP groups. Max. are 128 groups for each VLAN.

Port Members

The ports that are members of the entry.

Querier Status

Show the Querier status is “ACTIVE” or “IDLE”.

Querier Receive

The number of Transmitted Querier.

V1 Reports Receive The number of Received V1 Reports.
V2 Reports Receive The number of Received V2 Reports.
V3 Reports Receive The number of Received V3 Reports.
V2 Leave Receive

The number of Received V2 Leave.

Refresh

Click to refresh the page immediately.

Clear

Clears all Statistics counters.

Auto-Refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Summary of Contents for CWGE28FX4TX24MS






















































































































Search results

Summary of Contents for CWGE28FX4TX24MS

Reviews:

Related manuals for CWGE28FX4TX24MS

Brands by name

Popular brands

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Search results

Summary of Contents for CWGE28FX4TX24MS

Reviews:

Related manuals for CWGE28FX4TX24MS

Brands by name

Popular brands