manualshive.com logo in svg

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Share
Download
Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 47

INS_CWGE28FX4TX24MS_REV–   08/31/12     PAGE 47

INSTALLATION AND OPERATION MANUAL 

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

VLAN

VLAN Membership Configuration

The VLAN membership configuration for the selected stack switch unit switch can be monitored 
and modified here. Up to 64 VLANs are supported. This page allows for adding and deleting 
VLANs as well as adding and deleting port members of each VLAN.

Label

Description

Delete

Check to delete the entry. It will be deleted during the next save.

VLAN ID

The VLAN ID for the entry.

MAC Address

The MAC address for the entry.

Port Members

Checkmarks indicate which ports are members of the entry. Check or uncheck as 
needed to modify the entry.

Adding a New 
Static Entry

Click to add a new VLAN ID. An empty row is added to the table, and the VLAN can be 
configured as needed. Legal values for a VLAN ID are 1 through 4095.

The VLAN is enabled on the selected stack switch unit when you click on 

Save

. The VLAN is 

thereafter present on the other stack switch units, but with no port members.

A VLAN without any port members on any stack unit will be deleted when you click 

Save

.

The Reset button can be used to undo the addition of new VLANs.

Summary of Contents for CWGE28FX4TX24MS






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands