manualshive.com logo in svg

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Share
Download
Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 20

INS_CWGE28FX4TX24MS_REV–   08/31/12     PAGE 20

INSTALLATION AND OPERATION MANUAL 

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

LLDP

LLDP Configuration

This page allows the user to inspect and configure the current LLDP port settings.

Label

Description

Port

The switch port number of the logical LLDP port.

Mode

Select LLDP mode. 
Rx only  The switch will not send out LLDP information, but LLDP information from neighbor 

units is analyzed.

Tx only  The switch will drop LLDP information received from neighbors, but will send out 

LLDP information.

Disabled  The switch will not send out LLDP information, and will drop LLDP information 

received from neighbors.

Enabled  The switch will send out LLDP information, and will analyze LLDP information 

received from neighbors.

Summary of Contents for CWGE28FX4TX24MS






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands