Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 67

Page: 67 / 117

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 67

INSTALLATION AND OPERATION MANUAL

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Queuing Counters

This page provides statistics for the different queues for all switch ports.

Label

Description

Port

The logical port for the settings contained in the same row.

Low Queue

There are 4 QoS queues per port with strict or weighted queuing
scheduling. This is the lowest priority queue.

Normal Queue

This is the normal priority queue of the 4 QoS queues. It has higher
priority than the “Low Queue”.

Medium Queue

This is the medium priority queue of the 4 QoS queues. It has
higher priority than the “Normal Queue”.

High Queue

This is the highest priority queue of the 4 QoS queues.

Receive / Transmit The number of received and transmitted packets per port.

Summary of Contents for CWGE28FX4TX24MS






















































































































Search results

Summary of Contents for CWGE28FX4TX24MS

Reviews:

Related manuals for CWGE28FX4TX24MS

Brands by name

Popular brands

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Search results

Summary of Contents for CWGE28FX4TX24MS

Reviews:

Related manuals for CWGE28FX4TX24MS

Brands by name

Popular brands