manualshive.com logo in svg

Comnet CWGE28FX4TX24MS, Installation And Operation Manual

Share
Download
Comnet CWGE28FX4TX24MS Installation And Operation Manual Download Page 27

INS_CWGE28FX4TX24MS_REV–   08/31/12     PAGE 27

INSTALLATION AND OPERATION MANUAL 

CWGE28FX4TX24MS

TECH SUPPORT: 1.888.678.9427

Port Setting

Port Control

This page displays the current port configurations. Ports can also be configured here.

. 
. 
.

Label

Description

Port

This is the logical port number for this row.

Link

The current link state is displayed graphically. Green indicates the link is up and red 
that it is down.

Current Link 
Speed

Provides the current link speed of the port.

Configured Link 
Speed

Select any available link speed for the given switch port.  
Auto Speed selects the highest speed that is compatible with a link partner.  
Disabled disables the switch port operation.

Flow Control

When Auto Speed is selected for a port, this section indicates the flow control capability 
that is advertised to the link partner.  
When a fixed-speed setting is selected, that is what is used. The Current Rx column 
indicates whether pause frames on the port are obeyed, and the Current Tx column 
indicates whether pause frames on the port are transmitted. The Rx and Tx settings are 
determined by the result of the last Auto-Negotiation. 
Check the configured column to use flow control. This setting is related to the setting for 
Configured Link Speed.

Maximum Frame

Enter the maximum frame size allowed for the switch port, including FCS. The 
allowed range is 1518 bytes to 9600 bytes.

Excessive Collsion 
Mode

Configure port transmit collision behavior.  
Discard: Discard frame after 16 collisions (default).  
Restart: Restart back-off algorithm after 16 collisions.

Summary of Contents for CWGE28FX4TX24MS






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands