inS_cnge2fe16MS_reV–
01/11/12 Page 108
INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
System Commands Set
Commands
Level Description
Example
show config
E
Show switch configuration
switch>
show config
show terminal
P
Show console information
switch#
show terminal
write memory
P
Save user configuration into
permanent memory (flash rom)
switch#
write memory
system name
[System Name]
G
Configure system name
switch(config)#
system name xxx
system location
[System Location]
G
Set switch system location string switch(config)#
system location xxx
system description
[System Description]
G
Set switch system description
string
switch(config)#
system description
xxx
system contact
[System Contact]
G
Set switch system contact
window string
switch(config)#
system contact xxx
show system-info
E
Show system information
switch>
show system-info
ip address
[Ip-address] [Subnet-mask]
[Gateway]
G
Configure the IP address of
switch
switch(config)#
ip address
192.168.1.1 255.255.255.0
192.168.1.254
ip dhcp
G
Enable DHCP client function of
switch
switch(config)#
ip dhcp
show ip
P
Show IP information of switch
switch#
show ip
no ip dhcp
G
Disable DHCP client function of
switch
switch(config)#
no ip dhcp
reload
G
Halt and perform a cold restart switch(config)#
reload
Do you want reboot the device now?
yes
default
G
Restore to default
switch(config)#
default
Keep current IP address setting?
yes
Keep current user ID/password?
yes
Default setting restored. Do you want
to reboot the system now?
yes
admin username
[Username]
G
Configure the administrator’s
login username.
(maximum 10 words)
switch(config)#
admin username
xxxxxx
admin password
[Password]
G
Configure the password for the
administrator account
(maximum 10 words)
switch(config)#
admin password
xxxxxx
show admin
P
Show administrator information switch#
show admin
guest username
[Username]
G
Configure the guest’s login
username
switch(config)#
guest username
xxxxxx
