inS_cnge2fe16MS_reV–
01/11/12 Page 56
INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
Port Statistics
The Port Statistics chart provides the current statistics information that displays the real-time
packet transfer states for each port. The user might use the information to plan and implement the
network, or check and find the problem when a collision or heavy traffic occurs.
»
Port:
Port number indexed.
»
Type
: Displays the network media type of the port.
»
Link
: The states of linking —
Up
or
Down
.
»
State
: Displays port states set by the Port Control interface. When the state is disabled, the
port will not transmit or receive any packet.
»
Tx Good Packet
: The counts of transmitting good packets via this port.
»
Tx Bad Packet
: The counts of transmitting bad packets (including undersize [less than 64
bytes], oversize, CRC Align errors, fragments and jabbers packets) via this port.
»
Rx Good Packet
: The counts of receiving good packets via this port.
»
Rx Bad Packet
: The counts of receiving good packets (including undersize [less than 64 bytes],
oversize, CRC error, fragments and jabbers) via this port.
»
Tx Abort Packet
: The counts of aborted packets while transmitting.
»
Packet Collision
: The counts of packet collision.
»
Packet Dropped
: The counts of dropped packets.
»
Rx Bcast Packet
: The counts of broadcast packets.
»
Rx Mcast Packet
: The counts of multicast packets.
»
Select the
Clear
button to clear the Port Statistics chart of all counts.
Figure 54 – Port Statistics interface
