inS_cnge2fe16MS_reV–
01/11/12 Page 81
INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
Trap Configuration
A trap manager is a management station that receives trap messages generated by the switch.
If no trap manager is defined, no traps will be issued. To define a management station as a trap
manager, assign an IP address, enter the SNMP community strings, and select the SNMP trap
version.
»
IP Address
: Enter the IP address of the trap manager.
»
Community
: Enter the community string for the trap station.
»
Trap Version
: Select the SNMP trap version—v1 or v2c.
»
When finished, select
Add
.
»
To remove a specific manager station, select the entries listed in the Current Managers field
and select
Remove
.
Figure 75 – Trap Managers interface