inS_cnge2fe16MS_reV–
01/11/12 Page 52
INSTALLATION AND OPERATION MANUAL
CNGE2FE16MS
TECh SUPPORT: 1.888.678.9427
»
SNTP Server URL
: Specify the SNTP server IP address. You can assign a local network time-
server IP address or an internet time-server IP address.
»
Switch Timer
: When the switch has successfully connected to the SNTP server whose IP
address was assigned in the field of SNTP Server URL, the current coordinated time is
displayed here.
»
Daylight Saving Period
: Set up the start and end date/time of the daylight saving period.
Please key in the value in the format of ‘YYYYMMDD’ and ‘HH:MM’ (leave a space between
‘YYYYMMDD’ and ‘HH:MM’).
›
YYYYMMDD:
an eight-digit year/month/day specification.
›
HH:MM
: a five-digit (including a colon mark) hour/minute specification.
›
For example, key in ‘20070701 02:00’ and ‘20071104 02:00’ in the two fields respectively
to represent that DST begins at 2:00 a.m. on March 11, 2007 and ends at 2:00 a.m. on
November 4, 2007.
»
Daylight Saving Offset (mins)
: For non-US and European countries, specify the amount of time
for daylight savings. Please key in the valid figure in the range of minute between 0 and 720,
which means you can set the offset up to 12 hours.
»
Synchronization Interval (secs)
: The Synchronization Interval is used for sending synchronizing
packets periodically. Users can assign the time ranging from 64 to 1024 seconds. A
0
value
displaying by default means that you disabled the auto-synchronized feature in the SNTP client
mode. You can enable the feature by filling the interval range from 64~1024 seconds.
»
Select
Apply
to have the configuration take effect.
Figure 50 – SNTP Configuration interface
