CommScope SYSTIMAX iPatch Panel Manager'S Manual Download Page 49

Page: 49 / 87

Chapter:

Performing Patching Activities

3–11

Removing a Connection Between iPatch Panel Ports

Disconnect the patch cord from one of the iPatch Panel ports.

The associated LEDs blink, the iPatch Manager sounds a sensor beep, and the
display lights up and shows:

Locate the other iPatch Panel port. Look for the iPatch Manager display that is
lighted and the port LED that is blinking.

Disconnect the patch cord from the appropriate iPatch Panel port.

The associated LEDs turn off, the iPatch Manager sounds a completion tone,
and the display lights up and shows:

Removing a Patch Connection Between an iPatch Panel Port and Other Equipment

Disconnect the patch cord from the appropriate equipment port.

Disconnect the patch cord from the appropriate iPatch Panel port.

The iPatch Manager sounds a sensor beep, the associated LED blinks, and the
display lights up and shows:

Press and hold for 2 seconds the button corresponding to the port used in
Step 2.

The associated LED turns off, the iPatch Manager sounds a completion tone,
and the display shows:

(icon flashing)

Removing Connection Rack 1
Rack 1 | Rack 1
Panel 10 | Panel 2
Port 7 | Port 9
|

Remove the other end of the patch cord.

Details Cancel

Removing Duplex Connection Rack 1
Rack 1 | Rack 1
Panel 10 | Panel 2
Port 7 | Module 2
| Port 9

Remove the other end of the patch cord.

Details Cancel

Rack 1
Ready
Last Action: Removed Connection
Rack 1 | Rack 1
Panel 10 | Panel 2
Port 7 | Port 9
|

Rack 1
Ready
Last Action: Removed Connection
Rack 1 | Rack 1
Panel 10 | Panel 2
Port 7 | Module 2
| Port 9

Confirm Removal Rack 1

Rack 1 | Rack 3
Panel 10 | Server 1
Port 7 | Card 1
| Port 19
Press and hold the port button.

Details Cancel

Rack 1
Ready
Last Action: Removed Connection
Rack 1 | Rack 3
Panel 10 | Server 1
Port 7 | Card 1
| Port 19

Summary of Contents for SYSTIMAX iPatch Panel
























































































Search results

Summary of Contents for SYSTIMAX iPatch Panel

Reviews:

Brands by name

Popular brands

CommScope SYSTIMAX iPatch Panel, Manager'S Manual

Search results

Summary of Contents for SYSTIMAX iPatch Panel

Reviews:

Brands by name

Popular brands