manualshive.com logo in svg

CommScope SYSTIMAX iPatch Panel, Manager'S Manual

Share
Download
CommScope SYSTIMAX iPatch Panel Manager'S Manual Download Page 42

Guide:

 SYSTIMAX

®

 iPatch

®

 Panel Manager Guide

3–4

Performing Add Connection Jobs

There are two main types of Add Connection jobs:

ƒ

a patch connection to be added between two ports on iPatch Panels

ƒ

a patch connection to be added between a port on an iPatch Panel and a port 
on a non-iPatch panel or network equipment.

Instructions are provided below for performing each type of Add Connection job.

Adding a Connection Between iPatch Panel Ports

If the iPatch Manager display shows a screen like the screen below, perform the 
steps below to add a patch connection between two iPatch Panel ports.

Note: 

The LEDs on the iPatch Panel ports to be used in the job turn on. The iPatch 

Manager display lights up on the iPatch Manager units where the panels to be used 
in the job are located.

1

Locate one of the indicated iPatch Panel ports. Look for an iPatch Manager 
display that is lighted and a port LED that is on.

2

Connect one end of the patch cord to the indicated iPatch Panel port.

The iPatch Manager sounds a sensor beep and the display shows:

3

Locate the other indicated iPatch Panel port.

4

Connect the other end of the patch cord to the indicated iPatch Panel port.

The iPatch Manager where the last connection was made sounds a completion 
tone. The associated LEDs turn off.

If there is another job in the job queue, the next job appears.

or

or

Add Connection                   Rack 1  
 Rack 1           | Rack 3
 Panel 2          | Panel 12
 Port 4           | Port 9 
                  |
00-224 Provide service
Press   to view the next job.

 

 Details                         Exit

Add Connection                   Rack 1  
 Rack 1           | Rack  3  
 Panel 2          | Panel 12
 Port  4          | Module 2
                  | Port 9          
00-224 Provide duplex fiber service
Press   to view the next job.

 

 Details                         Exit

Add Connection                   Rack 1 
 Rack 1           | Rack 3
 Panel 2          | Panel 12           
 Port  4          | Port 9
                  |
00-224 Provide service
Connect the other end of the patch cord.

 Details                        Cancel

Add Connection                   Rack 1 
 Rack 1           | Rack 3 
 Panel 2          | Panel 12            
 Port 4           | Module 2
                  | Port 9
00-224 Provide duplex fiber service
Connect the other end of the patch cord.

 Details                        Cancel

Summary of Contents for SYSTIMAX iPatch Panel
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands