manualshive.com logo in svg

CommScope SYSTIMAX iPatch Panel, Manager'S Manual

Share
Download
CommScope SYSTIMAX iPatch Panel Manager'S Manual Download Page 44

Guide:

 SYSTIMAX

®

 iPatch

®

 Panel Manager Guide

3–6

Performing Remove Connection Jobs

There are two main types of Remove Connection jobs:

ƒ

a patch connection to be removed from two ports on iPatch Panels

ƒ

a patch connection to be removed from a port on an iPatch Panel and a port on 
a non-iPatch panel or network equipment.

Instructions are provided below for performing each type of Remove Connection 
job.

Removing a Patch Connection Between iPatch Panel Ports

If the iPatch Manager display shows a screen like the screen below, perform the 
steps below to remove a patch connection between two iPatch Panel ports.

Note: 

The LEDs on the iPatch Panel ports where the connection is to be removed 

blink. The iPatch Manager display lights up on the iPatch Manager units where the 
panels to be used in the job are located.

1

Locate one of the indicated iPatch Panel ports. Look for an iPatch Manager 
display that is lighted and a port LED that is on.

2

Disconnect the patch cord from the indicated iPatch Panel port.

The iPatch Manager sounds a sensor beep and the display shows:

3

Locate the other indicated iPatch Panel port. Look for the iPatch Manager 
display that is lighted and a port LED that is blinking.

4

Disconnect the patch cord from the other indicated iPatch Panel port.

The iPatch Manager where the last connection was removed sounds a 
completion tone and the associated LEDs turn off.

If there is another job in the job queue, the next job appears.

or

(icons flashing)

or

(icon flashing)

Remove Connection                Rack 1  
 Rack 1           | Rack 3   
 Panel 2          | Panel 12           
 Port 4           | Port 9 
                  |  
00-224 Remove service
Press   to view the next job.

 

 Details                         Exit

Remove Connection                Rack 1  
 Rack 1           | Rack 3
 Panel 2          | Panel 12          
 Port 4           | Module 2   
                  | Port 9
00-224 Remove duplex fiber service
Press   to view the next job.

 

 Details                         Exit

Remove Connection                Rack 1 
 Rack 1           | Rack 3
 Panel 2          | Panel 12           
 Port 4           | Port 9
                  |
00-224 Remove service
Remove the other end of the patch cord.

 Details                        Cancel

Remove Connection                Rack 1  
 Rack 1           | Rack 3
 Panel 2          | Panel 12           
 Port 4           | Module 2 
                  | Port 9
00-224 Remove duplex fiber service
Remove the other end of the patch cord.

 

 Details                        Cancel

Summary of Contents for SYSTIMAX iPatch Panel
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands