CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 11 / 108

OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 xi
D
R
A
F
T
Document revision history
The following section lists documentation changes in OneCell
®
Installation and
Commissioning, RP5000 (913035) for R4.0, the release for RP5000 series devices.
Revision 4.0.04 (June 6, 2019)
• Appendix D, Field Replaceable Units
— Added topic, Replacing RF modules on page D-48
Revision 4.0.03 (May 21, 2019)
• Chapter 1, CommScope OneCell® overview
— Revised Baseband Controller physical ports on page 1-3, including Table 1-1
on page 1-4
• Chapter 5, Configuring the OneCell system
— Revised Timing Source, Boundary Clock Interface Port in Table 5-2 on
page 5-17
— Added GPS Information bullet to Configuring the Baseband Controller
manually on page 5-25
— Revised Whitelist Configuration in Table 5-3 on page 5-26
• Chapter 6, Verifying the OneCell installation
— Revised Verify the OneCell system installation on page 6-2
• Added Appendix A, Safety and Appendix D, Field Replaceable Units
Revision 4.0.02 (March 27, 2019)
• Revised procedures in Chapter 4, RP5100i installation
Revision 4.0.01 (March 13, 2019)
• Initial document release