CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 104 / 108

Chapter 6 Verifying the OneCell installation
6-6 913035 4.0.04 June 2019
D
R
A
F
T
Figure 6-4. Timing Source Status - PTP
Link to PTP details page
Radio Point Status
The chart in this screen shows a visual glance of all the Radio Points status in the
Baseband Controller. Green indicates 'In Service'. Red indicates 'Out of Service'.
Verify that the number of RPs installed matches the number of RPs In Service. If not,
navigation to the Radio Point Information page. For more information on the Radio
Point Information page, see
OneCell
®
Administration (913026).
NOTE
Click the Link icon, in the upper right corner of this area, to navigate to the Radio
Point Information page.
Service Status
Verify the status of the following:
• MME Connection
• Configuration from HeMS
• IPsec Connection Status
• IPSec Tunnel Status
• CA Server Configuration
• Operator Certificate Configuration
When you see a green status indicator for all entries, your Baseband Controller is
functional and ready to operate.