CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 97 / 108

Chapter 5 Configuring the OneCell system
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 5-27
D
R
A
F
T
For more information on configuring the BC manually, see OneCell
®
Administration
(913026).
Configuring firewall ports
In order for the OneCell device to communicate with DMS, firewall ports need to be
configured.
10 Confirm and submit From this screen the user views a summary of the
configuration which can be modified if needed.
When configuration is correct the user applies the
configuration to the Baseband Controller by
authorizing a reboot.
Table 5-3. Deployment Wizard steps (continued)
Step Menu Name Description
Table 5-4. Configurable DMS service and protocol ports
Row # Service
TCP/
UDP Protocol
port
Protocol Configurable Use
1 HDM Admin console TCP 9002 HTTP Install/Upgrade
only HDM Admin
console
HDM Managed console TCP 7003 HTTP Install/Upgrade
only HDM Managed
console
2 Load Balancer TCP Configured
port HTTP Load Balancer
setup only Load Balancer
3 DMS Admin console TCP 7001 HTTP Install/Upgrade
only DMS Admin
console
4 DMS Network console
DMS Device console
DMS Service Provisioning
TCP 8001
8011
HTTP Install/Upgrade
only DMS consoles
5 DMS to Device communication TCP 22
80
21
SSH
SFTP
FTP
HTTP
No DMS to Device
6 DMS to Device communication TCP 22
80
21
SSH
SFTP
FTP
HTTP
No Device to DMS