CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 96 / 108

Chapter 5 Configuring the OneCell system
5-26 913035 4.0.04 June 2019
D
R
A
F
T
Table 5-3. Deployment Wizard steps
Step Menu Name Description
1 System Configuration You have the option, in the System Configuration
screen, to upload a configuration file that contain all
information necessary to complete the configuration
cycle. If no configuration file is used, you will enter
configuration manually one screen at a time.
2 Deployment Questionnaire In the Installation Wizard, you will be asked to
complete a Topology Questionnaire. This
questionnaire provides information such as the IPsec
tunnel configuration, timing sources and inclusion in
a Redundancy cluster.
3 Network Interface configuration Network Interface configuration contains sub-menus
for configuring the following network interface
items:
• Management Port
• Backhaul
• Boundary Clock
– If timing source is from a PTP server
• Fronthaul
• High Availability
4 Operator Network Access
configuration Operator Network Access configuration contains
sub-menus for configuring the following operator
access items:
• HeMS
• Security
• PTP Server
• CA Server
• Root Certificate
5 Nominal GPS Configuration This screen contains configuration for Nominal GPS
parameters for Radio Points.
6 Trap Configuration This screen contains configuration for SNMP traps
and displays a list of device alarms.
7 User Management This screen is used to create and edit users and enter
authentication information for local, LDAP and
RADIUS servers.
8 Whitelist Configuration This screen is used to enter Whitelist Radio Point
MAC addresses manually, separated by commas, or
upload Radio Point MAC addresses from an external
file.
9 License Management This screen is used to view existing licenses, upload
a file with licenses, and download a license report.