CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 23 / 108

Chapter 1 CommScope OneCell® overview
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 1-3
D
R
A
F
T
Figure 1-1. OneCell solution
OneCell hardware components
The OneCell hardware consists of the following components:
• Baseband Controller
— Baseband Controller Chassis
— Baseband Controller Module
— Power/Fan Unit (PFU)
Baseband Controller physical ports
The following ports are on the front panel of the Baseband Controller Module.
Table 1-1 shows the port assignments. In addition, there is a connector used for the
GPS antenna cable.
NOTE
For more detailed BC port information, see OneCell
®
Network Planning Guide
(913023).