ADCP-90-459 • Issue 2 • June 2016
Page 9
© 2016
CommScope
. All Rights Reserved.
1.2.5
Bulk Storage
Figure 7
shows the Bulkhead Storage model. This model stores 150 1.6mm patch cords (with
two meters stored per patch cord). Patch cords can enter from top or bottom, left or right side.
Figure 7. Bulkhead Storage 2RU FMT
1.3
Attenuators
Attenuators (optional) decrease the optical power in a fiber by a specific or adjustable amount.
Once the desired level of attenuation is determined, fixed attenuators may be inserted in the
fiber optic line to deliver a precise output. In the 48-position termination/splice (FMT-GTL)
configuration and 72-position termination configuration (FMT-GN7), attenuators may be used
on either side of the sliding adapter packs. In the 72-position termination (FMT-GRT)
configuration, attenuators may only be used on the rear (back) side of sliding adapter packs.
2
DIMENSIONS AND SPECIFICATIONS
Figure 8
shows 2RU FMT dimensions for rack type, rack width, and recess options.
Table 1
lists
specifications for the 2RU FMT.
24296-A
SLIDE
LATCH
(2 PLACES)
RADIUS
LIMITERS
(2 PLACES)
SLIDING RADIUS
LIMITER (2 PLACES)
MOUNTING
BRACKET
(2 PLACES)
WAX LACING
TIE-DOWN POINTS
(EACH SIDE)
VELCRO LOOP
(PROVIDED)
TIE-DOWN POINTS
(EACH SIDE)
RADIUS LIMITERS FOR
STORAGE SPOOLS
