ADCP-90-459 • Issue 2 • June 2016
Page 4
© 2016
CommScope
. All Rights Reserved.
Figure 1. 2RU FMT (Micro-VAM Model Shown)
1.2
Configurations and Components
The 2RU FMT is currently available in a variety of DIP configurations, with more being
developed based on customer requests. The configurations available as of this printing of this
manual are:
• Termination (FMT-GRT, universal entry);
• Termination (FMT-GN7, left entry for Intrafacility Fiber Cable);
• Micro-VAMs (FMT-GVM, universal entry);
• 48-position termination/splice (FMT-GTL, left side splice, right side termination).
• Bulk storage (FMT-GBS, universal entry).
For multifiber cable assemblies, FMTs with termination for IFC (left entry) is your best choice. If
you are installing patch cords terminated with adapters, universal entry is your best choice.
1.2.1
Termination (Universal Entry)
Figure 2
shows the main external features of the 64-position termination model (available with
up to 72-terminations.
The features shown include the following (going from bottom left clockwise):
• Slide Latches (2)—Hold tray closed. Sliding latches inward releases tray to be opened.
24291A
DROP-IN
PLATE (DIP)
BASIC
CHASSIS
