manualshive.com logo in svg

Command Communications ASAP P2.5X, Operator'S Manual

Share
Download
Command Communications ASAP P2.5X Operator'S Manual Download Page 28

1.    Lift the handset connected to 

EXT 20 

- the system tone is heard.

2.    Press 

 

 

 - you will hear a long system tone.

3.    Replace the handset for two seconds and then lift the handset. You will hear the system tone again.

4.    Press 

 

 

 

5.    Press 

 or 

 to select number phone lines.

6.    Replace the handset for two seconds and then lift the handset. You will hear the system tone again.

7.    Press 

 

 

 - you will hear two short system tones.

8.    Hang up.

Note:

 Refer to Page 23, Section 7.1 Outbound call forwarding or Page 27, Section 9 

After Hours

 priority

calls for examples.

8. Speed dialing

8.1 Extension speed dialing

Setting extension speed dial numbers - each extension can store 10 telephone numbers:

 

 

 speed dial number   telephone number   

1.    Lift the handset.
2.    Press 

 

3.    Press speed dial number 

 

 ~ 

 

4.    Enter telephone number.
5.    Press 

 - you will hear a long system tone.

6.    Hang up.

Cancel or delete a number 

 

 

 speed dial number 

 

1.    Lift the handset.

2.    Press 

 

3.    Press speed dial number 

 

 ~ 

 

4.    Press 

 - you will hear two short system tones.

5.    Hang up.

25

ASAP P2.5X Operator’s Guide

Summary of Contents for ASAP P2.5X

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands